產品介紹
產品特點
Product Features
斜邊封邊
所見即所得，
0-45度封邊快速實現，
斜直適宜，一應俱全，
全斜邊、部分斜邊、直邊自由切換，
支持厚度9-25mm，
隨板應變、滿足所需。
What you see is what you get,
Quick finishing of
0-45 degrees edge banding
Both bevel and vertical
edging are available
Full bevel，partial bevel and vertical edge switch freely，
Support thickness 9-25mm，
Vary with panel to meet the needs.
（部分斜邊 Partial bevel edge）
（全斜邊 Full bevel edge）
銑削機構 Milling Unit
直邊預銑可對垂直邊進行銑削，
斜邊預銑可鋸切并粉碎切削斜邊。
Vertical pre-milling unit
mills vertical edge
Bevel pre-milling unit cuts
and crushes bevel edge.
封邊帶成型裝置
Edge Band Forming Device
對封邊內側進行開槽成型，
便于折彎壓貼，保證粘貼質量，防止爆邊。
Groove the inner side of edge，
It is convenient for bending and pasting，ensuring pasting quality
and preventing edge cracking.
履帶壓料 Belt conveyor
壓緊接觸面積大，
具有更 好的壓緊定位效果。
Large contact area for pressing
Better pressing and positioning effect.
前后齊頭 Endcutting
通過精密的直線導軌運動，
將工件首尾封邊帶切斷，
控制帶前帶后用量，保證切斷面平整。
Through precise linear guide motion，
Cut off the reduntant edge
at both ends of workpiece，
Control the reserved length
of edge in the front and
rear ends to ensure the
flatness of cutting section.
智能溫控
Intelligent Temperature Control
10寸觸摸屏，一鍵操作設置保溫功能，
設備空運轉時，
自動切換至停機保溫功能狀態。
Equipped with 10 Inch Touch screen，
one key operation to set
the insulation function，
When the equipment is idling，
Automatically switch to
shutdown insulation state.
清潔機構 Clean Unit
清除殘余膠，保持板面清潔。
Remove the residual glue
and keep the board clean.
設備應用
Application
用于無拉手抽屜板，
柜門等家具特殊斜邊的封邊。
Used for drawer board without handle，
Edge banding for special bevels
of furniture such as cabinet door.
基本參數 Parameters
